Rki-instruments GX-2009 Manual do Utilizador Página 46
- Página / 54
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
46 • Setting Commands
Logger Overwrite
With Logger Over Write set to On (factory setting), the
GX-2009 writes over the oldest data with new data when the
data logger memory is full.
With Logger Over Write set to Off, the GX-2009 stops saving
data to the data logger when the data logger memory is full to
avoid overwriting old data.
Calibration Time Limit
This setting defines the amount of time between calibrations.
The minimum setting is 1 day and the maximum setting is 365
days. The factory setting is 90 days.
Cal. Limit Display
With Cal. Limit Display set to On (factory setting), the GX-2009
will give an indication at start up if it is due for calibration. The
type of indication will depend on the Cal. Limit Check setting
(see next item below).
With Cal. Limit Display set to OFF, if an instrument is due for
calibration, it will give no indication at startup that it is due for
calibration.
Cal. Limit Check
This item defines what indication is given during start up when
calibration is due and Cal. Limit Display is set to On.
With Cal. Limit Check set to Confirm to use (factory setting),
the GX-2009 will give an indication at start up if calibration is due
and require the user to press and release the POWER MODE
button to continue.
With Cal. Limit Check set to Can’t use, if the unit is due for
calibration the GX-2009 will give an indication at start up that
calibration is due and the unit cannot be used until it is
calibrated. With this setting, it is necessary to calibrate the
instrument before it can be used. You may calibrate the
instrument using the User Setup Program or the GX-2009’s
Calibration Mode or User Setup Mode. See “Calibration” on
page 28 for instructions to calibrate an instrument using the
User Setup Program. See the GX-2009 Operator’s Manual for
- GX-2009 User Setup Program 1
- Operator’s Manual 1
- Warranty 2
- Table of Contents 3
- Introduction 4
- System Requirements 5
- IrDA Downloading Cable 11
- Wireless Link Operation Note 12
- 6. Click OK 13
- Launching the Program 14
- Connecting a GX-2009 to 15
- TRANSMIT 17
- C--LIMIT 17
- B--LIMIT 18
- B--LIMIT 18
- Read Commands 19
- Instrument Information 20
- Read Commands • 21 21
- 22 • Read Commands 22
- Information Get & Save 23
- 24 • Read Commands 24
- Read Commands • 25 25
- Write Commands 26
- Date/Time Set 27
- Calibration 28
- Write Commands • 29 29
- 30 • Write Commands 30
- Write Commands • 31 31
- To Fixed Flow 32
- Regulator 32
- Calibration Tubing 32
- Adapter Plate 32
- 34 • Write Commands 34
- Write Commands • 35 35
- Setting Commands 36
- Load Local File 37
- 38 • Setting Commands 38
- Setting Commands • 39 39
- 40 • Setting Commands 40
- Store Local File 41
- 42 • Setting Commands 42
- Setting Commands • 43 43
- Detail Settings 44
- Setting Commands • 45 45
- 46 • Setting Commands 46
- Setting Commands • 47 47
- 48 • Setting Commands 48
- Setting Commands • 49 49
- 50 • Setting Commands 50
- Setting Commands • 51 51
- 52 • Setting Commands 52
- Spare Parts List 53
- 54 • Spare Parts List 54
- Table 1: Spare Parts List 54
- Part Number Description 54
Intellinet Adaptery PoE podręczniki użytkownika
Lista Intellinet Adaptery PoE produkty zawierają 4 instrukcje obsługi do modeli 4. Wszystkie podręczniki użytkownika w formacie pdf są dostępne do pobrania lub obejrzenia online.
Comentários a estes Manuais